Control Panels
Designed, fabricated, and wired to standard — documented to the last terminal.
Detail sheet
How we build it
Every deployment is documented to the last terminal, so your team can own it the day we hand it over.
Panels are where good engineering becomes visible. We design to standard, fabricate with tested components, and wire so the next engineer can trace a circuit without guessing. Every panel ships with as-built drawings, a terminal schedule, and photographs of the finished build.
- Build
- MCC, PLC, VFD & distribution panels
- Documentation
- As-built drawings + terminal schedule
- Testing
- Continuity, insulation & functional
In detail
What you should know
How this building block behaves in a working plant, and where it fits.
Built to be worked on
A panel is opened by someone under pressure, often years later. Layout that groups by function, wire numbers that match the drawing, and space left for a hand and a meter are what make the difference between a ten-minute fix and a two-hour one.
Cramming a panel to save on enclosure cost is a false economy paid for by every future maintenance visit.
Thermal and protection design
Heat is what quietly ends component life. We calculate the dissipation inside the enclosure and size ventilation or cooling for the ambient conditions the panel will actually sit in, which in an Indian plant room is rarely the temperature on the datasheet.
Protection coordination is designed rather than assumed, so a downstream fault trips its own device instead of the incomer.
Documented to the last terminal
Every panel ships with as-built drawings that match what was actually built, a terminal schedule, and photographs of the finished interior. If a change happened during commissioning, the drawing changes with it.
Drawings that no longer match reality are worse than no drawings, because people trust them.
Applied
Where it earns its place
- New machines or lines needing a control or MCC panel
- Replacing panels that have been modified so often the drawings are fiction
- Consolidating scattered local control into one documented enclosure
- Panels for washdown, dusty or high-ambient environments
What ships with it
- Fabricated and wired panel, tested before dispatch
- As-built drawings and terminal schedule
- Bill of materials with component datasheets
- Test records: continuity, insulation and functional
- Photographs of the finished build
Common questions
- Do you design as well as build?
- Yes, and it works better that way. Panels built to someone else’s drawing inherit whatever the drawing got wrong, and nobody is clearly responsible for the result.
- What about washdown or dusty areas?
- The enclosure rating is chosen for the environment. Hygienic and dusty areas also change component and gland selection, not just the box.
- Can you modify our existing panels?
- Yes. We document what is actually in there first, because modifying a panel from an out-of-date drawing is how avoidable faults get introduced.
Elsewhere in the stack
Other solutions
The layers above and below this one — most projects use three or four together.